One of the most common issues that appear on the screen due to a problem with the printer’s printhead or cartridge is Canon printer error code 1403. If this happens, your printing job will be postponed until the problem is resolved. This article will provide you with in-depth knowledge that will enable you to effectively resolve error 1403.

What causes Canon Printer Error Code 1403?

According to experts, the Canon printer error 1403 is caused by the following factors.

  • Misplaced printhead: Error 1403 could be caused by the printhead becoming dislodged from its position as a result of the printer jerking. When you move the printer device, this type of issue is most common.
  • Ink cartridge(s) in the printer has a defect: The printer’s ink cartridge is a necessary component without which the printing job cannot be completed. The error code 1403 will appear if it becomes faulty.
  • Improper ink cartridge placement: If you remove an ink cartridge from its proper slot by accident, this can result in an error message with code 1403 on the printer control panel.
  • Insufficient upkeep: To stay operational, a printer device must be used at least twice a week. If this time frame is not followed, the ink in the printhead nozzle may dry out, resulting in errors.

Furthermore, a lack of printer cleaning causes error 1403.

The Canon printer error code 1403 has a number of effective solutions listed below.

Canon Printer Error Code 1403 Expert Assistance

Are you trying to figure out how to fix Canon printer error 1403? You can then exhale a sigh of relief, knowing that you’ve arrived at your destination. Following the steps outlined below will allow you to resolve the problem.

Stage 1:

To begin, press the Power button to turn on the printer. Then, lift the lid of the printer. Following that, you can see the printhead moving from right to left and vice versa, but it may not be complete, which is one of the Epson printer error code 1403 symptoms. And this usually happens when the printhead has a problem or if it moves slightly from its original location due to a jerk while relocating the printer. If this is the case, the only way to fix the problem is to reinstall the printhead properly.

The printhead should be taken out.

Uninstalling a printhead is a straightforward procedure. To begin, open the printer’s lid and disconnect it from the power source, then remove all cartridges from the printhead. To protect yourself from electrical injury, disconnect the printer from the power source before removing the cartridges.

After you’ve removed the cartridges, you can detach the printhead from the printer’s body by unplugging the cord that connects it to the body. Ascertain that no other parts of the printer are harmed during the procedure. Remember not to touch the printhead’s sensitive parts, which are the electric conducting parts, or the cartridges’ sensitive parts. Clean all of the printer parts that you can now access with a cotton swab dipped in an alcohol solution after removing the printhead. After thoroughly cleaning each printer part, allow it to dry. It’ll only take a few minutes to finish.

Reinstall the Printhead if necessary.

In the correct order, reinstall the printhead and cartridges. Also, double-check that the cartridges were installed in the correct slots. Close the printer’s lid and reconnect it to the power source after that. Carry on with the printing process to see if the issue has been resolved.

Stage 2:

If you still have the Canon printer error code 1403 after completing the preceding steps, try the steps below to see if the problem has been resolved.

The error may appear if the cartridges are not properly inserted into the printhead’s slots. Fake ink cartridges can also cause this error code. As a result, only use Canon printer cartridges.

To check the location of the cartridge, open the printer lid first, and do so before turning on the printer device. Plug out the cable from the printer’s rear to disconnect it from the power source once the printhead is in a location where you can access it. Remove the cartridges from their slots one by one. Then, using the colors beneath each slot as a guide, place the cartridges in the correct order. To turn on the printer, close the lid and reconnect the cable. Then, to see if the error has been resolved, retry a printing job.

Stage 3:

If the error persists after attempting both of the preceding solutions, you will need to replace both the printhead and the cartridges. After that, you’ll be able to resolve the issue.

When installing the new parts, you must be cautious of the procedures once more. The procedure is described in detail in the manual. To avoid further haemorrhage, carefully follow the instructions.

These are the stages; if you follow each one, you will be able to successfully resolve the Canon printer error code 1403.