Home » Blogs » Canon Printer Error Code 6800 Solution

Canon Printer Error Code 6800 Solution

Canon Printer Error Code 6800 Solution

Many users have recently reported Canon printer error 6800 that prevents them from printing or using the printer. That’s why we’ve put together this comprehensive guide to help you tackle this problem completely by providing you with the right solutions.

Recently, many users have reported Canon printer error 6800, which prevents them from printing or using the printer. That’s why we’ve put together this comprehensive guide to help you address this issue completely by providing you with the right solutions.

1. What Causes Canon Printer Error 6800?

After some basic troubleshooting techniques, we concluded that some of the main reasons why this error appears are:

– A generic error can cause error 6800, preventing the printer from loading the configuration properly. Therefore, this issue may be resolved with a simple reboot as described in the method below.

– Debris: Over time, debris can build up inside the printer, preventing mechanical parts from moving properly and causing this error when trying to print. Therefore, cleaning the printer thoroughly as described in the solution below can help overcome this obstacle.

– Now that we know most of the causes of error 6800 on Canon printers, let’s fix them.

2. Canon Printer Error 6800: How to fix

Solution 1: Restart the printer

-To start, press and hold the power button on the printer for 3-4 seconds to turn it off.

– Then turn off the printer and wait 3-4 minutes. -Reconnect the power supply and turn on the printer after waiting time.

– Test your printer to make sure it is working properly.

See also  How to install canon e470 printer on windows 10

Solution 2: Reinstall the printer

– Start by rebooting the printer as described in Solution 1.

-Then select General Tools Software from the drop-down menu.

– Next, locate the USB port and select “Set Destination 1” to complete the reset process.

-Finally, check again if the Canon printer error 6800 is gone.

Solution 3: Reinstall the printer (alternate method)

-Connect the power adapter to turn on the printer.

– Then press and hold the “Reset/Stop” button for about 7-9 seconds.

– Press and hold the reset button for about 5-6 seconds while pressing the copy button at the same time.

– Then release the Copy button first, then the Reset/Stop button.

– Reset the printer and you can use it again. Solution 4: Use a repair tool

– To use the repair tool, you must first download it if you have not already done so.

– Copy and paste the following link into your browser to download the software.

-Once the download is complete, run the program and follow the on-screen installation instructions.

– Launch the software and select “Scan”. Hold the button for a few seconds until the scan is complete.

– After the scan is complete and any errors are displayed on the screen, select Resolve Errors.

– Finally, restart your computer and printer to see if the Canon 6800 printer problem is resolved. Solution 5: Unplug and clean the printer.

– Check the printer cover for foreign objects. B. Paper pins or stains.

-Before removing the cartridge, please remove any unnecessary or excess items.

See also  ij start canon ts3122 chromebook

-Remove the ink cartridge from the printhead and dampen a cotton swab.

– Clean each ink cartridge and printhead individually and set the clean cartridge and printhead aside to dry. – After drying, put all components back in place and close the cover.

-Turn on the printer and see if Error: 6800 is resolved.

Solution 6: Replace your logic board

This type of error is usually caused by a motherboard failure. In this case, replacing the faulty motherboard with a new one will fix the problem. This type of repair cannot usually be done at home, so it’s a good idea to send the printer in for repair.

Solution 7: Contact Canon Service Center.

It is more likely that the printer will be damaged internally or the software will be corrupted. To solve this problem, please contact your nearest “Canon Service Center” to have the printer repaired.

Solution 8: Submit a warranty claim

Canon printers usually come with a one-year warranty. If the printer is undamaged externally or unopened, you are entitled to the warranty. Proof of purchase entitlement to service or replacement is required to make a warranty claim. Even if the warranty period has expired, you can apply for the “Canon Upgrade Program,” which allows you to replace your old or malfunctioning printer with a new printer.